CERAMIC 9H PROTECTION
​
→ Significantly shorter cleaning intervals
→ Excellent water-repellent properties
→ Safe for human health and the environment
→ Easy removal of algae
→ Protects against all environmental influences
→ Anti-fouling and anti-graffiti
→ Increased fuel efficiency
→ Corrosion protection
→ Protection against UV radiation
→ Excellent dirt-repellent properties
→ Resistant to harmful chemicals
→ Temperature resistant from -50 °C to +1500 ° C
→ Protects your teak from mold and rot
The highest standards of protection
NCP 9H sets the standard for protection in the shipping industry by offering a new level of preventive protection that has never been available before. Harsh marine conditions are a well-known problem for boat owners and enthusiasts. NCP 9H provides protection against saltwater corrosion and hull pollution caused by the build-up of algae and / or shells. Our ceramic 9H coating makes the surface so repellent to the rough underwater elements that the cleaning process is no longer a problem. Today our ceramic coating products for boats are used to protect everything from jet skis to superyachts around the world
GELCOAT & PAINT
The highest standards of protection
Very intensive UV exposure together with salty water are the main reasons for the oxidation of gelcoat and paint and the loss of color. NCP 9H is an innovative ceramic coating, has extreme chemical resistance and, as a solid layer, protects against both of these aspects. NCP 9H reduces the surface tension of your gelcoat coating and prevents algae from planting roots in the pores of your gelcoat coating, making the growth very easy to remove.
Today’s methods of cleaning the boat hull are strenuous and not very environmentally friendly. Our ceramic coating makes the surface so repellent to all rough underwater elements that the cleaning process is no longer a problem. Thanks to the hydrophobic effect, your boat or yacht glides much easier and faster through the water! This leads to increased fuel efficiency and also an increase in top speed.
Perfect protection
INTERIOR / TEAK WOOD
Our highly transparent ceramic 9H coating is also suitable for your valuable interior on the boat or on the yacht. For example, protect your teak wood from accidental spillage, staining, mold and rot. Sun and salt water cause teak surfaces to age quickly and a teak deck to look gray, washed out and unsightly. Our coating not only protects the wood from discoloration after sealing, but also reliably protects it from oxidation.
The coatings from Nano Ceramic Protect offer you maximum value and durability!
​
→ Teak → Marble → Metal surfaces → Painted surfaces → Ceramic surfaces →Granite → Chrome → Steel → Plastic parts → Glass / window
Innovative ideas
Nano Ceramic Protect Quick Detailer
Nano Ceramic Protect Wash & Wax Quick Detailer is the perfect product for quick cleaning and paint refreshment on boats and watercraft in between. Effortless removal of dust, grease, dirt, bird droppings or fingerprints and all without water.
​
Our Quick Detailer cleans, maintains and preserves in one step. The product is suitable for almost all smooth surfaces: paint, gel coat, metal, plastic, glass and chrome. The surfaces are cleaned gently and thoroughly. Thanks to the pH-neutral formula, the Quick Detailer is predestined for quick cleaning in between of sealed and waxed paints. The service life of the existing Nano Ceramic Protect coating is not affected, because the recipe is perfectly matched to it!
​
You can apply the Detailer directly to the surface to be cleaned and gently remove the dirt with a microfiber cloth. Alternatively, you can apply the Detailer to a microfiber cloth to avoid possible streaking and excess product. Simply put 2-3 sprayers on the cloth and apply. Then wipe again with the clean side or a new cloth.
Frequently Asked Question
On which surfaces can the coating be used?
The great thing about Nano Ceramic Protect 9H is its versatility. Our coating can be applied to literally any surface of the ship. There are no surfaces on your ship that cannot benefit from the advantages and protection of Nano Ceramic Protect 9H. For example: all lacquered surfaces, glass, plexiglass, ceramics, steel, marble, granite, Corian and similar surfaces and much more.
​
Does the coating also protect my teak?
Yes! Nano Ceramic Protect 9H protects your teak from accidental spillage, staining, mold and rot. Our surface sealing improves the natural appearance of the wood and makes oiling of any kind superfluous.
​
Does the coating also protect vinyl?
Yes. Nano Ceramic Protect 9H protects your vinyl from accidental spills, fish blood, stains, oil / rust and harmful UV radiation. Our surface sealing offers a self-cleaning effect so that your vinyl can be cleaned easily. So say goodbye to tons of vinyl cleaners.
​
Does the coating also protect metals?
Yes! Nano Ceramic Protect 9H does an excellent job of protecting your metals above and below water from corrosion, oxidation and discoloration. The self-cleaning effect of our surface sealing also makes maintenance a breeze. You don’t have to constantly buff your shiny work to keep it to its original shine.
Other Protection CERAMIC COATINGS
Nano Ceramic Protect® Remover​
Nano Ceramic Protect® Remover is a chemical, high-quality degreasing alcohol-based preparation. This primer is necessary before applying ceramic protective coatings for car paint, chrome and glass. After application of Nano Ceramic Protect® Remover, the applied preparations adhere firmly to the cleaned surface, which makes them last longer on its surface. The product should be used before all car paint and glass protection. The product is available for sale separately: the capacity is 80 ml.
Methods of application: manually with sponge applicator or with NCP SATA Spraying System.
​
Nano Ceramic Protect® Soft
Nano Ceramic Protect Soft is a high quality product for protecting car paint surfaces from the harmful influence of external and environmental causes. An easy and fast (about 30 minutes) method of preparation and application, allows you to gain an excellent effect with a minimum workload. Thanks to the nano ceramic structure, the covering which you gain protects the paint from permanent impurities and environmental factors, which have a negative influence on the condition of the paint finish. The product’s molecular structure creates an invisible matrix and will add ~ 20%-30% increase in gloss to the finish. The advantage of this matrix structure allows you to save both time and money, normally devoted to frequent paint cleaning. Nano Ceramic Protect Soft stays on paint surface for up to 12 months, however it is recommended to refresh the surface after 6 months. Application of NCP Soft will provide; protection up to 12 months, UV radiation resistance, protection from environmental factors, high hydrophobicity (repels water, dirt, debris,) easy to clean and maintain, high paint glow, and nourished color.
Set contains: √ 80 ml Nano Ceramic Protect® Soft √ sponge applicator √ microfiber 30×30 cm. Methods of application: manually with sponge applicator or with NCP SATA Spraying System.
​
Nano Ceramic Protect® Sealant
Nano Ceramic Protect® Sealant is a unique synthetic wax made from a combination of the highest quality polymers, without the addition of silicone. It masks smaller scratches, discolorations and mists, leaving a protective layer that lasts up to 6 months. Nano Ceramic Protect® Sealant facilitates the car’s washing process and ensures protection of min. against: UV rays, road salt and insect adhesion. Surface preparation: In order for the Nano Ceramic Protect® Sealant to remain on the surface of our car for as long as possible, a key aspect is surface preparation. Before using the Nano Ceramic Protect® Sealant, wash the car thoroughly with Nano Ceramic Protect® Shampoo, and use a Nano Ceramic Protect® Remover.
Set contains: √ 80 ml Nano Ceramic Protect® Sealant √ sponge applicator √ microfiber 30×30 cm. BENEFITS: √ easy in application, √ durability up to 6 months, √ protection against UV rays, √ protection against harmful environmental factors, √ high hydrophobicity: the phenomenon of repelling water or dirt particles from the surface protected with a lacquer formulation that stays dry and clean for a long time, √ high paintwork gloss, saturated and nourished color of the lacquer.To extend the life of Nano Ceramic Protect® Sealant, use Nano Ceramic Protect® Quick Detailer after each wash. Methods of application: manually with sponge applicator.
​
Nano Ceramic Protect® Crystal Wax
Nano Ceramic Protect® Crystal Wax is the finest nanotechnological wax which protects your car paint surface from a harmful influence of external causes. Unusually easy and short lasting (about 30 minutes) method of preparation application, allows to gain an excellent effect with a minimum workload. Thanks to the ceramic structure, the covering which we gain, protects the paint from the permanent impurity and environmental factors, which have a negative influence on its condition. The preparation molecular create an invisible net, which advantages allow to save time and money, devoted to frequent paint clean so far. Nano Ceramic Protect® Crystal Wax stays on a surface of paint up to 3 months. The product is available for sale separately: the capacity is 80 ml.
BENEFITS: √ Easy in application,√ Durable up to 3 months, √ High paint gloss, rich and nourished colour, √ UV radiation resistance, √ Protection from harmful environmental factors, √ High hydrophobicity: the phenomenon of water and impurity molecules repulse from a surface of a paint covered by preparation, which stays dry and clean for a long time. Methods of application: manually with sponge applicator.
​
Nano Ceramic Protect® Plastic
Nano Ceramic Protect Plastic is a high quality product, which finds use in a maintenance of car elements made from gum or plastics. The ceramic covering forming on a surface of protected components, acts like a specific cover from a negative influence of external factors. Thanks to the innovative production process, based on a nanotechnology, the Nano Ceramic Protect Plastic effectively protects the protected surface from durable impurities, fade, mechanical damages or UV radiation. A proper conservation assures also a long-lasting protection of colour, durability and resistance on water and will definitely ease the gum and plastic parts cleaning process in a car. The product may be used to elements made form gum and plastics placed both inside and outside of a car. Additionally Nano Ceramic Protect Plastic proves as a gaskets and tires protection, giving them a maximal protection from a degeneration under influence of harmful external factors.
Set contains:√ 80 ml Nano Ceramic Protect® Plastic √ sponge applicator √ microfiber 30×30 cm. Methods of application: manually with sponge applicator or with NCP SATA Spraying System.
​
​
​
Nano Ceramic Protect® Leather Set
Laying the protection covering counteracts against creation of awkward impurities – the residue does not stick to the upholster, and liquids do not absorb into the upholster structure (the hydrophobicity effect), which make impurities easy to remove. Unusually effective and durable reparation, devoted to leather car pholsters, which require a specific protection. The ceramic coating, which crystallizes after an application, causes gain of a clean and maximal protected upholstery.
NCP® MAINTENANCE SERIES
CutX - Paint Renovator
Nano Ceramic Protect® CutX leaves a long lasting finish which can be applied to all types of new and used vehicles paintwork. It will cut back faded and oxidised paintwork and also removes minor swirls, holograms scratches, hazing and the greasy residue caused by inferior polishes. Tar and fly stains can also be removed. Product does not dirty plastics, seals and leaves no streaks.
Shampoo – Super Concentrate
Nano Ceramic Protect® Shampoo – Super Concentrate Highly foaming concentrate for cleaning cars, derived from vegetable oils, completely biodegradable. Removes dirt from all types of surfaces: paint, chrome, glass, gum, vinyl, plastic, etc. Leaves a protective coating and high gloss. Very efficient product with a special formula and fresh fragrance. Product with neutral pH.
​
Tar & Glue Remover
Nano Ceramic Protect® Tar & Glue Remover - product to remove tar, grease, asphalt, resin, glue from the foil etc. Easily cleans hard to remove dirtiness from the paint, floors and other surfaces. Product evaporates slowly making a long drying time, which helps the work. It does not leave stains, degrease the surface leaving it clean and dry.
APC - concentrate
Nano Ceramic Protect® APC - concentrate - Universal cleaner for various applications. Perfect for cleaning leather, material upholstery, carpets, plastics and for use in industry and household. Safe to use, efficient and effective, with a pleasant fragrance.
Interior Cleaner - Ready to use
Nano Ceramic Protect® Interior Cleaner - Ready to use universal cleaner for various applications. Perfect for cleaning leather, material upholstery, carpets, plastics and for use in industry and household. Safe to use, efficient and effective, with a pleasant fragrance.
Glass Cleaner - concentrate
Nano Ceramic Protect® Glass Cleaner is a product, thanks to which car windows are perfectly protected and the driver gains a non-comparable improvement of visibility both during a day and night. Nanomoleculars, included in the Nano Ceramic Protect® Glass preparation, form on a glass’s surface durable, ceramic protection covering. That layer causes a repulsion of water molecular (the hydrophobicity effect), causing their immediate and automatic from a car glass during driving. Thanks to this, the need of car wipers use is eliminated during rain.
​
